M-VAVE guitar wireless transmission system is a device specially developed for the wireless connection of electric guitars. We try our best to present you this wireless device with low noise, low latency, high sound quality resolution (48KHz) and long effective transmission distance.
Sampling rate 24bit/48KHz uncompressed data transmission
Delay <12ms
Effective range ≤30 meters outdoor transmission distance or 15 meters through wall distance
Distortion -98dB
Dynamic range >105dB
Frequency band 2.4GHzISM frequency band
Frequency response 20-20KHz, +1dB/-3dB
Rotation direction 280 rotatable joint, suitable for most electro-acoustic instruments
Support equipment can support 6 groups of equipment to work at the same time
Connection port USB charging port
Interface icon:
① Input (out) signal:
Input: Connect to your musical instrument, such as an electric guitar or electric bass. Output: Connect to input ports such as speakers or effects.
②280 rotatable joint: suitable for most electronic musical instruments. 3USB charging port.
4LED indicator lights. The red light keeps on:
(1) Indicates that the device is charging.
(2) It indicates that the battery of the device is about to be exhausted.
When the green light is displayed: the pairing is successful and the battery of the device is sufficient.
The receiver flashes slowly: After turning on the receiver’s power switch, it has not entered the pairing state. Transmitter flashes slowly: After turning on the power switch of the transmitter, it has not entered the pairing state. Fast flashing: Enter the pairing state.
⑤Pairing button: After turning on the power, long press to enter the pairing state. ⑥ Power: Switch the on/off status of the device.
how to use
1 Connect the wireless transmitter to your guitar signal output port, and connect the receiver to the speaker or effector input port, etc.
2 Turn on the power of the transmitter and receiver, when you see the LED lights of the two devices light up green and flash slowly. This means that your device has not yet been paired.
3 Long press the pairing button of the receiver. Then the LED light will flash quickly. This means that the device has entered the pairing state; press and hold the pairing button of the transmitter with which it needs to send a signal, and after a while, the lights of the transmitter and receiver will turn green. This indicates that the pairing has been successfully completed, and you can hear the sound by playing the guitar at this time.
4 Please charge your transmitter and receiver through the USB port (the LED indicator will continue to light up when the device is almost out of power, and the light will not be on when there is no power).
5 Our wireless system can support:
6 pairs of transmitters and receivers work simultaneously in the same environment; ②One transmitter sends signals to multiple receivers.
Reviews
There are no reviews yet.